MEP Estimator (Mechanical, Electrical, Plumbing)

The need for MEP estimator services is constant among contractors. In the shortest turnaround time of 24 to 48 hours, The Estimating Studio offers reasonable, accurate, and cost-effective cost estimates. Our takeoffs consistently help general contractors win bids. For more than ten years, we have provided material takeoff and construction cost estimation services. As a subset of HVAC services, mechanical estimates are a specialty of our team of committed cost estimators.

mep-estimator-services

Mechanical Estimation Sample

Electrical Estimation Sample

Plumbing Estimation Sample

Insulation Estimation Sample

Pinping Estimation Sample

RANGE OF MEP ESTIMATING SERVICES

  • – Material takeoffs
  • – Bid estimates & bidding assistance
  • – Preliminary estimates & feasibility studies
  • – Budget & design estimates
  • – Change order estimates
  • – Litigation assistance
  • – Project Cost Management
  • – Project lead generation
  • – CPM scheduling
  • – MEP drafting
  • – Digital takeoff sheets
  • – Material quantities & pricing
  • – Labor costs & labor hours
  • – Marked up drawing plans
  • – Takeoff summary containing, labor hours, total material and labor costs, rentals, equipment, taxes, overheads, profit percentage, etc.
  • – Complete bid review with inclusion & exclusion sheet

The need for MEP estimator services is constant among contractors. In the shortest turnaround time of 24 to 48 hours, The Estimating offers reasonable, accurate, and cost-effective cost estimates. Our takeoffs consistently help general contractors win bids. For more than ten years, we have provided material takeoff and construction cost estimation services. As a subset of HVAC services, mechanical estimates are a specialty of our team of committed cost estimators.

Many of the MEP contractors have outsourced their complete estimation to us, we believe you should too. Get 30% on your first MEP estimate!

Just Upload Plans In The Below Link,
We Will Review And Send A Quote In The Next 1 Hours

What Components Do We Estimate In MEP Estimating Services?

  • – Sheet Metal
    – Dehumidifier
    – Air-handling units
    – Chillers
    – Boilers
    – Furnaces
    – Heat Pumps
    – Duct
    – Signage
    – Lighting
    – Low Voltage
    – Electrical
    – Plumbing
    – Sprinklers
    – Fire Proofing
    – Fire Protection
    – Fire Suppression
    – Moisture Protection
    – Pipe Insulation
    – Spray insulation
    – Fire stopping
    – Air Filters

MECHANICAL ESTIMATOR

“We offer a full spectrum of mechanical estimating services for a diverse range of projects, including fabrication, design, and installation of HVAC systems, refrigeration systems, insulations, plumbing, and piping systems. Discover the expertise of our specialist team of Mechanical, Electrical, and Plumbing (MEP estimator) on staff. We quantify every mechanical component for the mechanical takeoffs, including the humidifiers, air filters, water heaters, water handling units, air conditioning units, rooftop units, exhaust fans, pumps, louvres, ducts, pipes, pipe fittings, duct supports, thermostats, boilers, heat pumps, chillers, dampers hangers, and dust smoke detectors.”

PLUMBING ESTIMATING SERVICES

We provide estimates for any plumbing system work, including new instals, additions, and repairs. projects ranging from residential to business to industrial. Our estimators make sure that all the information is appropriately included in the estimates so that you may effectively bid on projects, establish favourable profit margins, and obtain supplies from suppliers. We measure all plumbing parts, such as drains, pumps, water heaters, boilers, valves, oil separators, fixture carriers, flashings, and plumbing fixtures, such as toilets, sinks, basins, showers, bathtubs, strainers, faucets, bidets, and drinking fountains. We also measure plumbing equipment, such as valves, hangers, supports, insulation, valves, concealments, and pipe fittings.

INSULATION ESTIMATING SERVICES

For all mechanical works, including HVAC pipe, HVAC duct, industrial piping, industrial duct, plumbing, equipment, and fire-stopping, we provide insulation estimation services. We offer services for projects of various shapes and sizes, including industrial and commercial projects. Including pipe insulation, ductwork insulation, cold storage insulation, removable insulation systems, equipment insulation systems, tank insulation systems, plumbing pipe, cooling towers, exhaust systems, process pipe, refrigeration pipe, petrochemical pipe insulation, fire stopping, fireproofing, weatherproofing, and waterproofing, we quantify all types of insulation.

Are You Wasting Your Money On MEP Estimator Services In Market?

One of the top building cost estimation firms, The Estimating Studio, is committed to providing customers with services that are accurate, reasonable, and trustworthy. We provide monthly takeoff packages to our clients that enable you to save money in keeping with our motto for contractors, “Win More, bid More.” You may use our takeoff estimation service to accurately calculate the material needed for your building designs. We employ online price tools and the most up-to-date software, including as Bluebeam, Planswift, Trimble, FastPIPE, FastDUCT, and FastWRAP, to deliver the most exact and accurate construction cost estimates. Visit our entry in The Blue Book, please.

Outsource MEP Estimating Services To Us!

The best course of action for contractors who are always occupied with their routine is to outsource the MEP estimate and takeoff services. They cannot efficiently generate estimates or manage the bidding process, even if they accept responsibility for them. The contractors occasionally struggle with time constraints while submitting bids, and other times they run out of time, which causes them to earn less money and leave the majority of their bids neglected. By doing this, people lose out on job chances and ultimately suffer greatly due to lower income.

Contractors should choose The Estimating Studio over all other MEP estimating firms if they want to outsource their construction cost estimates and material takeoff services. Our monthly estimating package for contractors provides them with accurate quotes with the quickest response times and lowest overhead expenses for a fixed monthly fee.

Affordable Estimates

Our outsourcing estimating service helps you in saving your 60% of your expense in MEP takeoff services. Except for saving your expenses on estimation, you will get accurate and fast estimates in the least turnaround time.

Quick Turnarounds

We have a staff of skilled estimators that can estimate or takeoff home plans in as little as 24 to 48 hours, both for commercial and residential projects. Turnaround times for commercial estimates might change depending on the complexity and scale of the project.

Accurate Construction Cost Database

We deploy RSMeans and our developed construction cost database for material, labor and equipment pricing for up to date and zip code based costing.

OUR ESTIMATION PROCESS

The first step in the estimating process at The Estimating Studio is the review of the drawing plans by the MEP specialist, who has extensive prior experience working with Mechanical (HVAC), ducting, air-conditioning systems, refrigeration units, Electrical, low voltage equipment, and Plumbing takeoffs. The specifics, timelines, and requirements, together with a few small general observations, are taken into account.

Each drawing plan is then uploaded using our approved software, such as Trimble, Bluebeam, Plan Swift, FastWRAP, FastDUCT, etc. A senior estimator, who assures a cold-eyed evaluation from marked-up plans and takeoffs sheets in EXCEL, reviews the quantities from the plans after our qualified and certified estimator takesoffs them and ensures that all considerations, correct standards, and codes are followed.

Each line item is quantified, stated, and given the appropriate explanation in accordance with the goal. It is defined what the job-winning approach will be for bid estimates, procurement, and supply needs. After the estimation department has undergone peer review, estimates for residential, commercial, and industrial projects are presented to clients.

FAQs:

How much do we charge MEP estimates?

We usually charge an average of $200 for most of our estimates. But it actually depends on the scope of the project therefore, we encourage you to upload plans and get a free quote in the next 5 minutes.

What is the turnaround time of our MEP estimates?

The usual turnaround time for most of our estimates is 24-48 hrs. We believe we are the best in the market with respect to time and quality.

What is the turnaround time of our MEP estimates?

We deliver estimates in EXCEL spreadsheets in CSI MasterFormat, in your cost codes as per your demand.

 

The Estimating Studio has been providing construction takeoff services for more than 15 years in North America, Africa, Australia and the Caribbean. In the US, we take pride in serving all the states and follow their rules and regulations:

Florida, New Jersey, New York, Oklahoma, Georgia, Massachusetts, South Carolina, IllinoisTexasArizona, Indiana, North Carolina, Wyoming, Kentucky, Louisiana, Pennsylvania, Maryland, Alabama, Missouri, Washington, Connecticut, Minnesota, Colorado, Virginia, Hawaii, Michigan, Ohio, Alaska, Oregon, Tennessee, Wisconsin, Vermont, Montana, Arkansas, California, Delaware, Idaho, Iowa, Minnesota, Nebraska, New Hampshire, Nevada, Utah, Mississippi.

Contact Us Today

The Estmating Studio

Upload Plans

Turn-Around Time: 24 - 48 Hours!